Based of the successful IGT8 GT 2017 platform which was recently crowned USA 2017 National Champion.
Pictures show car with electronics and optionals not included.
||3215g (Weight may differ depending on electronics brands)
||13T bevel gear and 43T differential gear
18T pinion with 46T spur included
Spur options: 44T, 45T, 47T, 48T and 49T
800 CST Shock oil
100,000 CST Diff Oil
50,000 CST Diff Oil
Radio and receiver
Motor and speed control
Body and wing
Please refer to USB provided manual for assembly, a most recent version could be found in IGT8 Service & Supportsection if available.
The IGT8 GT Electric comes with all the necessary parts to be a competitive race car: However, we also have a great selection of option parts to satisfy even the most demanding racer.
Most of the optional parts are intended to reduce weight in the car. The IGT8 GT Electric is very close to minimum weight so please make sure to check car weight after adding any optional parts to make sure you comply with your local track rules.
Rear Body Support
This optional rear body support prevents the rear portion of the body from bending down and helps prevent body tucks.
Titanium Screw Set
Made of high grade titanium, this set of 100 screws replace the original steel screws in the kit.
Titanium Rear Brace Screw
Made of high grade titanium it also comes with an aluminum nut.
Titanium Front Arms Screws 4pcs.
Made of high grade titanium this screws replaces the original steel ones that secures the C Hub to the Front arms.
Titanium Turnbuckle Set 5pcs.
Made of high grade titanium this replaces original turnbuckles and steering rod part# IGT8HF089
CNC 0 Degree Front C Hub
CNC 0 degree caster hub (Red).
Aluminum A Bushings 4 pcs.
Made of hard coated aluminum, this part replaces original steel part IGT8HF042
Aluminum Joint Cups 2pcs
Made of hard coated aluminum, this part replaces original steel joint cup for center front and rear CVDs.
Aluminum Ball Set
Made of hard coated aluminum, this part replaces steel metal balls.
Titanium King Pins 4pcs
Made of high grade titanium this replaces original steel king pins part# IGT8HF040
Lightweight Differential Cup Joint 2pcs
Made of steel has openings to reduce weight compared to original diff cup joint part# IGT8HF005
Aluminum Steering Ball Joints 4pcs
Made of hard coated aluminum, this part replaces steel metal balls part# IGT8HF031
Serrated Wheel Nuts
Made of hard coated aluminum this serrated wheel nuts replace original part# IGT800H24
Rear 2.5mm Silver Swaybar
Silver 2.5mm rear Sway bar.
Front 2.5mm Silver Swaybar
Silver 2.5mm front swaybar.
Front 2.8mm Swaybar
2.8mm front swaybar.
Aluminum Differential Cross Pins 4pcs
Made of hard coated aluminum this pins replace steel original pins part# IGT8HF027
105mm Rear Universal Set
Made of steel, this part replaces rear dog bone and axle parts # IGT8HD003 and IGT8HD001
Carbon Fiber Transmission Top Mount
Replaces plastic top mount to provide less flex in the center of the chassis.
Carbon Fiber Ackerman A
Made of Carbon fiber and mounted in bearings for smoother response, this optional is the shortest ackerman option.
Carbon Fiber Ackerman B
Made of Carbon fiber and mounted in bearings for smoother response, this optional is the middle ackerman option which replaces part# IGT800H18
Carbon Fiber Ackerman C
Made of Carbon fiber and mounted in bearings for smoother response, this optional is the longest ackerman option.
2.3mm Suspension Springs 2pcs
This are optional softer suspension springs, 2 pieces fits front or rear.
Flex Top Plate
This is the optional top plate for the front, provides more flex than standard IGT8HA003
Rear Hub Shaft
This optional replaces part# IGT8HF019
Aluminum CVD Axle
Lighter front or rear axle made of hard coated aluminum; this part replaces part# IGT8HD004
Aluminum Short Lock Nuts 3mm (Red 5pcs)
Anodized red aluminum 3mm nuts.
Chassis Brace Front & Rear
Made of anodized red aluminum, this part replaces part# IGT8HA011
Aluminum Rear Up-Right w/Bearings
Optional anodized red aluminum rear up-right with bearings.
Lower FF Suspension Block
Used with the stock inserts, the new FF suspension block allows the racer to have greater adjustments for either anti-squad or anti-dive.
Carbon Fiber Steering Servo Arm for KO-SANWA-SPEKTRUM (23T)
1 pc for Steering. Made of 3mm Carbon fiber fits IGT8 GTe.
Center Optional Graphite Brace
Center Optional Graphite Brace. It needs IGT800F13 (Carbon Fiber Transmission Top Mount).
Center CVD Cover
Optional rubber boot for center CVD, fits front and rear
Optional plastic bumper.
Carbon Fiber Front Body Post Support
Optional carbon fiber front body post support.
The head size can be regulated.
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.