MIBO Touch Duo Racing AC/DC 400W is a dual-channel charger and discharger with a touchscreen display. It has built-in balancers with up to 200 W per channel for all battery types (NiMH, NiCd, LiPo, LiHV, Li-ion, LiFe and lead-acid). The charger is designed to be powered from a 100–240 V/50–60 Hz mains supply, a 12 V lead-acid battery (traction or car battery), or a suitable stabilised power supply.
The MIBO Touch Duo Racing is equipped with intelligent and user-friendly software that offers many useful functions and has a wide range of helpful capabilities:
- a program for new types of „high-voltage“ LiHV batteries with a terminal voltage for charging up to 4.35 V
- the end-voltage setting for charging and discharging lithium batteries (allowing the gentle charging that aviators like, or the brutal overcharging that „car guys“ are looking for
- the end-voltage setting for charging and discharging lead-acid batteries (allows all types of lead-acid batteries to be charged safely and optimally)
- measurement of the total voltage and the voltage of each cell (for lithium batteries) even without charging/discharging
- a MicroUSB port for firmware updates
- when powered from a mains supply, both channels can also serve as a stabilized power supply of 0.1–28 V with an adjustable current limiter of 0.1–20 A (up to 200 W)
- charging of smart batteries for drones (3S LiPo, 4S LiHV, 6S LiHV)
Overview of Basic Functions and Parameters:
- Input voltage 10–30 V DC - for full use of the charger's power, the power supply must be at least 24 V
- Mains supply 100–240 V/50–60 Hz
- For charging and discharging 1–15 NiCd/NiMH cells, 1–6 Li-ion/LiPo/LiFe/LiHV cells or 2–20 V lead-acid batteries
- Adjustable charging current (0.1–20.0 A) in 0.1 A steps
- Adjustable discharge current (0.1–5.0 A)
- When mains powered, allows power to be allocated to charging channels (2x 200 W, 1x 400 W, 300 W/100 W, 100 W/300 W)
- Max. discharge power of 25 W per channel
- Automatic charge and discharge mode for NiCd, and NiMH with adjustable current limit
- Charge termination with delta-peak automatic charging for NiCd and NiMH batteries
- Lithium and lead-acid batteries are charged using the „constant current/constant voltage“ method
- Adjustable sensitivity of delta-peak detection for NiCd and NiMH batteries
- Adjustable end voltage for charging and discharging lithium and lead-acid batteries
- Repeatable charge/discharge or discharge/charge cycling for NiCd and NiMH batteries, up to 5 cycles
- Three charging modes for lithium batteries - normal charging, balanced charging, storage charging/discharging.
- Termination of charging when the set time or delivered charge is exceeded.
- Memory for 8 charge/discharge programs.
- Measurement of the pack's total voltage and individual cell voltage (for lithium batteries)
- Measurement of the pack's total internal resistance and individual cell resistance (for lithium batteries)
- With the mains supply, the possibility of using both channels as a stabilised power supply with an output voltage of 0.1–28 V with an adjustable current limit of 0.1–20 A (max. according to the allocated power for the channel) to power other electrical equipment
- Programs for charging intelligent drone batteries (3S LiPo 11.1 V, 4S LiHV 15.2 V and 6S LiHV 22.8 V)
- Micro USB port for communication with PC and charger's firmware update
- USB power output 5.0 V/2.1 A for powering/charging mobile phones, tablets and similar devices
- Backlit LCD touch screen with simple and intuitive menu and parameter display during charging/discharging
- A number of text warning messages contribute to safe operation - incorrect input voltage, incorrect wiring, unsuitable battery or battery condition, incorrect polarity at the output
- Protection against over-polarity and short-circuit at the output.
- Compact aluminium enclosure
- Built-in fans for forced cooling
The charger is equipped with XT60 sockets in both channels and is shipped with 2 JST-XH service connector adapters allowing direct connection of power cables and JST-XH connectors of 2–6S LiPo packs. If you use packs with XT60 and JST-XH connectors, you don't need any charging cables. You can use common Sky RC or RC System adapters to connect service connectors from other systems.
Specifications:
| Input voltage (car battery - DC) [V] | 10 - 30 |
| Input voltage (mains - AC) [V] | 100 - 240 |
| Charging current channel 1 [A] | 0.1 - 20 |
| Charging current channel 2 [A] | 0.1 - 20 |
| Charging power channel 1 [W] | 200 |
| Charging power channel 2 [W] | 200 |
| Discharging current [A] | 0.1 - 5 |
| Discharging power [W] | 25 |
| Channels | 2 |
| NiCd [cell] | 1 - 15 |
| NiMH [cell] | 1 - 15 |
| Li-Po [cell] | 1 - 6 |
| Li-Ion [cell] | 1 - 6 |
| Li-Fe [cell] | 1 - 6 |
| Li-HV [cell] | 1 - 6 |
| Pb [cell] | 1 - 10 |
| Balancer | Yes |
| Balancer current [mA] | 500 |
| Length [mm] | 195 |
| Width [mm] | 143 |
| Height [mm] | 70 |
| Weight [g] | 1072 |
Includes:
- MIBO Touch Duo Racing charger
- 2x XT60/XT60+Dean-T charging cable
- 2x JST-XH balancer adapter 2–6S
- 2S LiPo hard-case charging cable
- 4mm banana/XT60 power cable
- mains power cable
- user manual